High-quality plaster beads, mesh, and finishing materials for professional plastering jobs. Precision-manufactured to meet the highest construction standards.
Professional-grade plastering products for every project
Provides a true, straight corner which protects and reinforces a 2 or 3 coat plaster or render application in its most vulnerable area. Galvanised for internal use or stainless steel for external use.
Manufactured to BS6452 Part 1: 1984. 50mm & 63mm jumbo wings available on request. Galv: DX51.BSEN 10142 (g 275). S-Steel: EN 10088-2 grade 1.4301.
Reinforces and protects one-coat finish plaster on corners and reveals at its weakest points on internal walls and plasterboard. Perforated for excellent adhesion with thin-coat plaster.
Both profiles at 79.5° angle. 135° bead with 24mm wing also available for unusual corners. Galv: DX51.BSEN 10142 (g 275). BS6452 Part 1: 1984.
Provides a precise, straight clean finish and reinforces 2 or 3 coat plaster or render on its edge. Galvanised for internal use or stainless steel for external use.
Manufactured to BS6452 Part 1: 1984. Galv: DX51.BSEN 10142 (g 275). S-Steel: EN 10088-2 grade 1.4301. Stainless steel available in 3.0m lengths only.
Provides a precise straight clean finish and reinforces one-coat plaster on its edge. Slightly malleable for use with gentle curves in plaster finish.
Manufactured to BS6452 Part 1: 1984. Galv: DX51.BSEN 10142 (g 275). Malleable design allows for slight curves in plaster finish.
Forms a neat bell-shaped edge at the bottom of external render finishes, protecting the edge and acting as a water run-off. Galvanised for sheltered areas, stainless steel for all other areas including coastal.
Manufactured to BS6452 Part 1: 1984. Galv: DX51.BSEN 10142 (g 275) for sheltered areas. S-Steel: EN 10088-2 grade 1.4301 for coastal & exposed areas. Stainless steel available in 3.0m only.
Reinforces and protects one-coat plaster on corners at its weakest points on internal walls and plasterboard. Greater expanded metal area provides a superior mechanical key for adhesion.
Manufactured to BS6452 Part 1: 1984. Galv: DX51.BSEN 10142 (g 275). Expanded mesh design for enhanced mechanical key and superior plaster adhesion.
Plaster key for suspended ceilings, walls, and encasing steel columns/beams for fire protection. Suitable for internal and external use with anti-crack control properties.
Manufactured to BS1369 Part 1: 1987. Galv: DX51.BSEN 10142 (g 275). S-Steel: EN 10088-2 grade 1.4301. 0.5mm galv also available.
Expanded metal sheets for internal and external plaster key applications with anti-crack control. Stiffened by longitudinal ribs for use on ceilings and partitions.
Manufactured to BS1369 Part 1: 1987. Galv: DX51.BSEN 10142 (g 275). S-Steel: EN 10088-2 grade 1.4301. Rib-stiffened for ceiling & partition use.
Brick and blockwork reinforcement to prevent cracking. Provides plaster key for internal (galvanised) and external (stainless steel) applications with anti-crack control.
Available in 20m coils across 5 widths: 63mm, 100mm, 175mm, 225mm & 305mm. Galv for internal use, S-Steel for external use.
Browse our full plaster range and purchase directly through our online shop.